Seed Rate Calculator

Enter target plant density, thousand-kernel weight, germination and establishment rates to get seeding rate in kg/ha, lb/ac, seeds per square meter, and total seed needed for a field.

The seeding rate in kg/ha is (target plants/m² × TKW in grams) divided by (germination fraction × establishment fraction) then divided by 100. For example, winter wheat targeting 250 plants/m² with a TKW of 40 g, 95% germination, and 85% establishment requires 124 kg/ha (110 lb/ac) and 310 seeds per square meter. A 40‑hectare field would need about 4.95 tonnes of seed.

Free, runs in your browser. Nothing you enter is uploaded.

How to use it

  1. Enter your target plant population per square meter.
  2. Input the thousand-kernel weight (TKW) in grams from your seed lot.
  3. Set germination percentage (from seed tag) and estimated establishment percentage based on field conditions.
  4. Enter your field area and select hectares or acres to see the total seed requirement.

What you enter

What you get

Formula

Seed rate (kg/ha) = target plants/m² × TKW (g) ÷ (germination % × establishment %) ÷ 100 (percentages as decimals) | lb/ac = kg/ha × 0.892

The core formula calculates the mass of seed per hectare: Seeding rate (kg/ha) = target plants per m² × thousand-kernel weight (TKW) in grams ÷ (germination fraction × establishment fraction) ÷ 100. Target plants per m² is the desired final crop stand. TKW is the weight of 1000 seeds in grams, which can vary by about 30% between seed lots of the same variety, so using a fixed kg/ha without measuring actual TKW can lead to unexpected plant densities. Germination fraction (e.g., 0.95 for 95%) is taken from the seed tag and represents the proportion of seeds that will sprout under ideal conditions. Establishment fraction is the proportion of germinated seeds that survive to form productive plants; it is lower on rough, dry, or cold seedbeds, with late sowing, broadcasting, or deep seed placement.

The division by 100 converts the result to kg/ha. In detail, the seeds needed per m² equals target plants ÷ (germination × establishment). Multiplying by TKW and converting from grams per m² to kilograms per hectare (10,000 m²) yields the final formula. You can also compute seeds to sow per m² directly as target plants ÷ (germination fraction × establishment fraction), which is helpful for setting drilling equipment.

For imperial units, the calculator converts using lb/ac = kg/ha × 0.892. To find the total seed required for a field, multiply the rate by the area. If the area is in acres, it is first converted to hectares (1 ac = 0.4047 ha). The result is shown in kilograms or tonnes.

Typical values illustrate the calculation: winter wheat often targets 250 plants/m² (TKW ~40 g), while spring wheat targets ~300, barley 250, oats 300, canola 50–80 (TKW 4–5 g), soybean 30–40 (TKW ~170 g), maize 7–9 (TKW ~300 g), and field pea 80 plants/m². Always use your seed lot’s germination rate from the tag and assess establishment based on your seedbed conditions to get a reliable rate.

Worked example

Input: Winter wheat: 250 plants/m², TKW 40 g, 95% germination, 85% establishment

Result: 124 kg/ha (110 lb/ac), 310 seeds/m²

40 ha needs about 4.95 t of seed.

Questions

How do I calculate seeding rate in kg/ha?

Multiply target plants per m² by thousand-kernel weight (TKW) in grams, then divide by the product of germination and establishment fractions, and divide by 100. For example, winter wheat at 250 plants/m², TKW 40 g, 95% germination, and 85% establishment gives 124 kg/ha.

Why does thousand-kernel weight matter for seeding rate?

TKW is the weight of 1000 seeds and can vary by up to 30% between seed lots of the same variety. If you sow by a fixed weight per hectare without accounting for TKW, you may end up with too many or too few plants, so measuring your seed lot's actual TKW is essential.

What is a typical establishment percentage for cereals?

Under good conditions, establishment for wheat and barley is often around 85%. It can be lower, roughly 60-70%, on rough, dry, or cold seedbeds, with late sowing, broadcasting, or deep planting.

How much seed do I need for 1 acre of maize?

Maize typically targets 7–9 plants/m² with a TKW around 300 g. Assuming 95% germination and 90% establishment, the calculator will show about 24–31 kg/ha (21–27 lb/ac) or roughly 10–13 kg per acre, but always enter your actual seed tag germination and field conditions.

Can I use this calculator for canola?

Yes. Canola targets 50–80 plants/m² and has a small TKW of 4–5 g. Enter your desired plant stand, the TKW from your seed lot, germination from the tag, and an appropriate establishment estimate to get a rate in kg/ha or lb/ac.

What does 'seeds per square meter' output mean?

It is the number of seeds you need to sow per m² to achieve your target plant stand after accounting for germination and establishment losses. You calculate it as target plants ÷ (germination fraction × establishment fraction). For winter wheat at 250 plants/m², 95% germ, 85% estab, it equals about 310 seeds/m².

Limitations

References

More Farm Planning

All free tools · By Dr. Zubair Khalid, DVM, MS, PhD.