Normality Calculator

Enter mass, volume, and equivalent factor to calculate normality, or convert between normality and molarity for acids, bases, and redox agents.

Normality (N) = equivalents per liter = molarity × n, where n is the number of H⁺ donated (acid), OH⁻ supplied or H⁺ accepted (base), electrons transferred (redox), or ionic charge (precipitation). For example, 4.904 g of H₂SO₄ (MW 98.07, n = 2) in 1 L gives 0.0500 M and 0.100 N. To make 1 L of 1 N HCl from 37% stock (12.1 N), dilute 82.8 mL of stock to 1 L with water.

Free, runs in your browser. Nothing you enter is uploaded.

How to use it

  1. Select the calculation type: mass to normality, molarity to normality, dilution, or stock reagent.
  2. Enter the required values such as mass, volume, molar mass, equivalent factor, or stock concentration.
  3. Read the normality in equivalents per liter (N).
  4. Use the result to prepare solutions, always adding acid to water for safety.

What you enter

What you get

Formula

N = M × n (equivalents per mole) | N = mass (g) ÷ (equivalent weight × volume L), equivalent weight = MW ÷ n | Dilution: N₁V₁ = N₂V₂

Normality (N) is equivalents per liter, equal to molarity (M) × n. The equivalent factor n is the number of H⁺ donated (acid), OH⁻ supplied or H⁺ accepted (base), electrons transferred (redox), or ionic charge (precipitation). Equivalent weight = molar mass ÷ n. From mass: N = mass (g) ÷ equivalent weight (g/eq) ÷ volume (L). This converts mass to equivalents, then divides by volume.

Dilution uses N₁V₁ = N₂V₂, because equivalents are conserved. For example, to make 1 L of 1 N HCl from 12.1 N stock, V₁ = (1 N × 1 L) / 12.1 N = 0.0826 L (82.6 mL). Always add acid to water.

Stock reagent normality: M = density (g/mL) × 1000 × (% w/w ÷ 100) ÷ MW; then N = M × n. Concentrated HCl (37%, 1.19 g/mL) ≈ 12.1 N; H₂SO₄ (98%, 1.84) ≈ 36.8 N; HNO₃ (70%, 1.42) ≈ 15.8 N; H₃PO₄ (85%, 1.685) ≈ 43.9 N (n=3); glacial acetic ≈ 17.4 N; NH₄OH (28% NH₃) ≈ 14.8 N.

Normality depends on the reaction. H₃PO₄ can be 1, 2, or 3 N. KMnO₄ in acid has n=5; K₂Cr₂O₇ n=6. IUPAC discourages normality due to this ambiguity. Always specify the reaction when using normality.

Worked example

Input: 4.904 g H₂SO₄ (MW 98.07, n = 2) in 1 L; 1 L of 1 N HCl from 37% stock

Result: 0.0500 M = 0.100 N; 82.8 mL of 12.1 N stock made up to 1 L

Add acid to water, never water to acid.

Questions

What is normality in chemistry?

Normality (N) is a concentration unit equal to equivalents of solute per liter of solution. It is calculated as molarity (M) multiplied by the equivalent factor (n), where n is the number of H⁺ donated (acid), OH⁻ supplied or H⁺ accepted (base), electrons transferred (redox), or ionic charge (precipitation). For example, 1 M H₂SO₄ is 2 N because it donates 2 H⁺.

How do you calculate normality from mass?

First determine the equivalent weight by dividing the molar mass by the equivalent factor (n). Then divide the mass in grams by the equivalent weight, and divide that by the volume in liters. Formula: N = mass (g) ÷ (molar mass ÷ n) ÷ volume (L). For instance, 4.904 g of H₂SO₄ (MW 98.07, n=2) in 1 L gives 0.100 N.

How do you convert molarity to normality?

Multiply the molarity (M) by the equivalent factor (n). For acids, n is the number of acidic protons; for bases, the number of hydroxide ions or protons accepted; for redox, the number of electrons transferred. Example: 0.0500 M H₂SO₄ (n=2) is 0.100 N.

What is the normality of concentrated HCl?

Concentrated hydrochloric acid (37% w/w, density 1.19 g/mL) has a molarity of about 12.1 M. Since HCl donates one proton (n=1), its normality is also 12.1 N.

How do you dilute a normality solution?

Use the dilution equation N₁V₁ = N₂V₂, where N₁ and V₁ are the normality and volume of the concentrated stock, and N₂ and V₂ are the desired normality and final volume. For example, to make 1 L of 1 N HCl from 12.1 N stock, you need V₁ = (1 N × 1 L) / 12.1 N = 0.0826 L (82.6 mL) of stock, diluted to 1 L with water.

Why is normality not recommended by IUPAC?

IUPAC discourages the use of normality because the equivalent factor (n) depends on the specific reaction. The same solution can have different normalities for different reactions (e.g., H₃PO₄ can be 1 N, 2 N, or 3 N depending on how many protons are neutralized). Molarity is unambiguous and preferred.

Limitations

References

More Chemistry

All free tools · By Dr. Zubair Khalid, DVM, MS, PhD.