How one reading tells you how much DNA you have (Video)

Written guide: How to Calculate DNA Concentration from Absorbance Readings

Full video: Beer-Lambert Law

One ultraviolet absorbance reading and the Beer-Lambert law give a DNA concentration and a purity check.

Watch on YouTube

Chapters

  1. 0:00 Full video
Video transcript

0:00 Full video

All new lab students run into the same question. You have a tiny tube of DNA, and it looks exactly like water. How do you know how much DNA is in that tube? The answer is that you shine light through the sample. The same reading also tells you whether your DNA is clean. DNA has no color you can see, but its bases absorb ultraviolet light strongly near 260 nanometers. So a machine called a spectrophotometer picks out that one wavelength, sends the light through your sample, and measures how much reaches a detector on the other side. Think about sunglass lenses. Each lens removes the same fraction of the light that reaches that lens, so two identical lenses stacked together darken your view as much as one lens of twice the thickness. Labs turn this into a number called absorbance. If half the light gets through, the absorbance is 0.30. If one tenth gets through, the absorbance is 1.0. If one hundredth gets through, the absorbance is 2.0. So each step of one means ten times less light. The law behind this number joins two observations. In the eighteenth century, Pierre Bouguer and then Johann Heinrich Lambert showed that absorbance rises with the distance light travels through a sample. In 1852, August Beer showed that absorbance rises with concentration in the same way. Together they give you A equals epsilon times l times c. A is the absorbance you read. Epsilon says how strongly the molecule absorbs. L is the distance through the sample. And c is the concentration you wanted all along. For double-stranded DNA, an absorbance of 1.0 at 260 nanometers in a one centimeter path means about 50 micrograms per milliliter. Say you dilute a sample 1 in 50, and it reads 0.45. Your original tube holds about 1,125 micrograms per milliliter. The law does have limits. It holds best for dilute solutions, and above an absorbance of about 1 to 1.5, the straight line bends downward. So you dilute the sample and read again. So how do you know the DNA is clean? Protein absorbs near 280 nanometers, because of its tryptophan and tyrosine. So you read the same sample at 260 and at 280, and you divide the first reading by the second. Pure DNA gives a ratio of about 1.8. A ratio well below 1.8 suggests protein or phenol left in your tube. The ratio warns you about contamination, but it does not correct the concentration you calculated. A tube of DNA looks like water, but the light that comes out the other side tells you what's inside. It really helps us make these videos.

Read more

All videos