# Scientific Notation: Rules, Examples and Conversions

Scientific notation is a compact system for writing very large and very small numbers as the product of a coefficient between 1 and 10 and a power of 10. It matters because biology, chemistry, physics, and medicine routinely produce measurements that span dozens of orders of magnitude, from the mass of a single electron to the number of cells in a human body.

## What Is Scientific Notation?

Scientific notation expresses a number in the form:

**a × 10ⁿ**

where **a** is the coefficient (also called the mantissa or significand) and **n** is an integer exponent. The coefficient must be greater than or equal to 1 and less than 10. The exponent tells you how many places the decimal point moves and in which direction.

For example, 4,500,000 becomes 4.5 × 10⁶. The decimal point in 4.5 sits six places to the left of where it sits in the full number. Likewise, 0.00032 becomes 3.2 × 10⁻⁴ because the decimal point moves four places to the right.

The system works because any number can be written as a value between 1 and 10 multiplied by some power of 10. Powers of 10 are simply 1 followed by zeros: 10⁰ = 1, 10¹ = 10, 10² = 100, and so on. Negative powers are fractions: 10⁻¹ = 0.1, 10⁻² = 0.01, 10⁻³ = 0.001.

Scientific notation is not just a formatting trick. It makes arithmetic with extreme values practical, it makes the scale of a measurement immediately visible, and it makes the precision of a measurement explicit through [significant figures](/blog/data-analysis/significant-figures-rules).

## Scientific Notation Rules

The rules below apply to every number written in proper scientific notation.

**Rule 1: The coefficient must be between 1 and 10.** For positive numbers, the coefficient a satisfies 1 ≤ a < 10. For negative numbers, the absolute value of the coefficient satisfies the same condition, so a is between -10 and -1. Writing 25 × 10³ is not proper scientific notation because 25 is not less than 10. The correct form is 2.5 × 10⁴.

**Rule 2: The base is always 10.** Scientific notation uses powers of 10, never other bases. A number like 3 × 2⁵ is exponential notation, but it is not scientific notation.

**Rule 3: The exponent must be an integer.** The exponent n can be positive, negative, or zero. A positive exponent means the original number is 10 or larger. A negative exponent means the original number is smaller than 1. An exponent of zero means the original number is between 1 and 10, so it is written without a power of 10. For example, 7.2 = 7.2 × 10⁰.

**Rule 4: The exponent tells you how many places the decimal point moved.** Moving the decimal point to the left increases the exponent by 1 for each place. Moving the decimal point to the right decreases the exponent by 1 for each place. This rule is the engine behind every conversion.

**Rule 5: The number of significant figures lives in the coefficient.** The power of 10 only sets the scale. It never adds or removes significant figures. The value 1.50 × 10³ has three significant figures, while 1.5 × 10³ has two.

**Rule 6: Zero is a special case.** Zero cannot be written in scientific notation with a meaningful coefficient because there is no power of 10 that multiplies a nonzero coefficient to produce zero. In practice, zero is written as 0 or 0.0 × 10ⁿ, and the exponent is chosen for convenience.

## How to Write in Scientific Notation

![Five steps showing how to move the decimal point, count the places and set the exponent sign when writing a number in scientific notation.](/article-images/illustrations/scientific-notation-convert-number.webp)

Converting a number to scientific notation is a two-step process: place the decimal point so the coefficient is between 1 and 10, then count the places the decimal point moved to find the exponent.

### Converting Large Numbers

Take the number 93,000,000.

1. Find the decimal point. It sits at the end of the number: 93,000,000.
2. Move the decimal point left until only one nonzero digit remains to its left: 9.3000000.
3. Count the places moved. The decimal point moved 7 places to the left.
4. Write the coefficient without trailing placeholder zeros: 9.3.
5. Attach the power of 10 with a positive exponent equal to the count: 9.3 × 10⁷.

The general shortcut is to count the digits between the first nonzero digit and the original decimal point. In 93,000,000, there are 7 digits between the 9 and the end of the number, so the exponent is 7.

### Converting Small Numbers

Take the number 0.0000412.

1. The decimal point sits after the leading zero: 0.0000412.
2. Move the decimal point right until it lands after the first nonzero digit: 000004.12.
3. Count the places moved. The decimal point moved 5 places to the right.
4. Write the coefficient: 4.12.
5. Attach the power of 10 with a negative exponent equal to the count: 4.12 × 10⁻⁵.

The shortcut for small numbers is to count the zeros between the decimal point and the first nonzero digit, then add 1. Here there are 4 zeros before the 4, so the exponent is -5.

### Converting Back to Standard Form

To convert 6.02 × 10²³ back to standard form, move the decimal point 23 places to the right, adding zeros as needed. To convert 1.6 × 10⁻¹⁹ back to standard form, move the decimal point 19 places to the left, adding zeros as needed: 0.00000000000000000016.

### Worked Examples

- 250,000 = 2.5 × 10⁵
- 1,000,000,000 = 1 × 10⁹
- 0.000000001 = 1 × 10⁻⁹
- 8,750 = 8.75 × 10³
- 0.00302 = 3.02 × 10⁻³
- 45.6 = 4.56 × 10¹

## Scientific Notation Examples

The table below shows familiar numbers from science and everyday life written in standard form and in scientific notation.

| Subject | Standard Form | Scientific Notation |
|--|--|--|
| Speed of light in a vacuum | 299,792,458 m/s | 2.99792458 × 10⁸ m/s |
| Avogadro's number | 602,200,000,000,000,000,000,000 | 6.022 × 10²³ |
| Mass of an electron | 0.0000000000000000000000000000009109 kg | 9.109 × 10⁻³¹ kg |
| Diameter of a red blood cell | 0.0000075 m | 7.5 × 10⁻⁶ m |
| Number of base pairs in the human genome | 3,100,000,000 | 3.1 × 10⁹ |
| Diameter of a typical virus | 0.0000001 m | 1 × 10⁻⁷ m |
| Population of the Earth | 8,100,000,000 | 8.1 × 10⁹ |

Notice how the exponent alone tells you the scale. An exponent of 23 means a number in the sextillions. An exponent of -31 means a decimal with 30 zeros before the first nonzero digit.

## E Notation and Calculator Notation

![Side by side comparison of scientific notation, e notation and engineering notation showing how each is written, its exponent rule and an example.](/article-images/illustrations/scientific-notation-notation-forms.webp)

Calculators, spreadsheets, and programming languages display scientific notation in a shorthand called **e notation**. In e notation, the letter "e" or "E" stands for "times 10 to the power of." The number 6.022 × 10²³ appears as 6.022e23 or 6.022E23. The number 9.109 × 10⁻³¹ appears as 9.109e-31.

E notation is not an error and it is not related to the mathematical constant e (approximately 2.718). It is purely a display convention. When a calculator shows 4.5E-7, it means 4.5 × 10⁻⁷, or 0.00000045.

A related convention is **engineering notation**, which restricts the exponent to multiples of 3 so that the coefficient pairs with standard metric prefixes. For example, 4.5 × 10⁶ in engineering notation is 4.5 × 10⁶, which corresponds to 4.5 megawatts. The value 2.5 × 10⁻⁹ corresponds to 2.5 nanoseconds. Engineering notation is common in electronics and laboratory instrumentation, while scientific notation is the standard in research publications.

When reading a result from a machine or a software package, check whether the display uses e notation. A value reported as 1.2e3 is 1,200, not 1.2 raised to the third power.

## Significant Figures in Scientific Notation

Significant figures (also called significant digits) are the digits in a measurement that carry meaningful information about its precision. Scientific notation is the clearest way to record significant figures because the coefficient shows exactly which digits are meaningful.

Consider the number 1,500. Written this way, it is ambiguous whether the zeros are significant. The writer might mean 1,500 to the nearest ten, the nearest hundred, or the nearest unit. Scientific notation removes the ambiguity:

- 1.5 × 10³ has two significant figures.
- 1.50 × 10³ has three significant figures.
- 1.500 × 10³ has four significant figures.

The same logic applies to small numbers. The value 0.00030 has two significant figures. In scientific notation it is written 3.0 × 10⁻⁴, and the zero in the coefficient signals that the measurement is precise to two digits.

Rules for significant figures in scientific notation:

- All nonzero digits in the coefficient are significant.
- Zeros between nonzero digits in the coefficient are significant.
- Trailing zeros in the coefficient are significant because they are written deliberately.
- Leading zeros never appear in the coefficient of proper scientific notation, so they cannot cause confusion.

When you convert a number to scientific notation, do not add or remove significant figures. If a measurement is 2.30 × 10², converting it to standard form gives 230, and the trailing zero is still significant. If you then round to 2.3 × 10², you have reduced the precision.

## Operations in Scientific Notation

Scientific notation makes multiplication and division of extreme values straightforward. Addition and subtraction require a little more care.

### Multiplication

Multiply the coefficients and add the exponents:

(2.0 × 10³) × (3.0 × 10⁴) = (2.0 × 3.0) × 10³⁺⁴ = 6.0 × 10⁷

If the product of the coefficients is 10 or greater, adjust the result. For example:

(5.0 × 10²) × (4.0 × 10³) = 20.0 × 10⁵ = 2.0 × 10⁶

### Division

Divide the coefficients and subtract the exponents:

(6.0 × 10⁷) ÷ (2.0 × 10³) = (6.0 ÷ 2.0) × 10⁷⁻³ = 3.0 × 10⁴

If the quotient of the coefficients is less than 1, adjust the result. For example:

(2.0 × 10³) ÷ (4.0 × 10²) = 0.5 × 10¹ = 5.0 × 10⁰

### Addition and Subtraction

![Worked addition of 2.0 times 10 to the third and 3.0 times 10 to the fourth, rewritten to a shared exponent, giving 3.2 times 10 to the fourth.](/article-images/illustrations/scientific-notation-add-exponents.webp)

You can only add or subtract numbers in scientific notation when the exponents match. To add 2.0 × 10³ and 3.0 × 10⁴, first rewrite one number so both share the same exponent:

2.0 × 10³ = 0.20 × 10⁴

Then add:

0.20 × 10⁴ + 3.0 × 10⁴ = 3.2 × 10⁴

Subtraction works the same way:

5.5 × 10⁵ - 2.0 × 10⁴ = 5.5 × 10⁵ - 0.20 × 10⁵ = 5.3 × 10⁵

### Powers and Roots

To raise a number in scientific notation to a power, raise the coefficient to that power and multiply the exponent:

(2.0 × 10³)² = 4.0 × 10⁶

To take a root, take the root of the coefficient and divide the exponent:

√(9.0 × 10⁶) = 3.0 × 10³

## Scientific Notation in Life Science and Medicine

<!-- art-pending: scripts/editorial-illustration/specs/scientific-notation-red-blood-cell.json -->

Biology and medicine deal with quantities that span an enormous range, and scientific notation keeps those quantities readable and comparable.

Cell and particle sizes are almost always reported in scientific notation. A red blood cell measures about 7.5 × 10⁻⁶ m across. A typical virus measures about 1 × 10⁻⁷ m. A DNA molecule's diameter is roughly 2 × 10⁻⁹ m. Comparing these values is immediate when the exponents are visible: the virus is about 100 times smaller than the red blood cell, and the DNA strand is about 50 times thinner than the virus.

Molecular counts follow the same pattern. Avogadro's number, 6.022 × 10²³, is the number of particles in one mole of a substance. A typical bacterial culture might contain 1 × 10⁸ colony-forming units per milliliter. A polymerase chain reaction can amplify a single DNA template into 2ⁿ copies, where n is the number of cycles, so 30 cycles produces roughly 1.07 × 10⁹ copies.

Genome sizes are naturally expressed in scientific notation. The human genome contains about 3.1 × 10⁹ base pairs. The bacterium Escherichia coli carries about 4.6 × 10⁶ base pairs. The difference in scale, about three orders of magnitude, is immediately obvious from the exponents.

In clinical diagnostics and research statistics, [p-values and odds ratios](/blog/guides/statistical-symbols-and-notation-a-quick-reference) are frequently so small that they are reported in scientific notation. A p-value of 1.2 × 10⁻⁸ means the probability of observing the result by chance is 0.000000012. Concentrations in enzyme assays and drug studies are routinely written as 1.5 × 10⁻⁶ M (micromolar) or 2.0 × 10⁻⁹ M (nanomolar), where the exponent maps directly to metric prefixes.

When you read a journal article, pay attention to the exponent before the coefficient. It tells you the order of magnitude, which is often the most biologically meaningful part of the number. A change from 10⁶ to 10⁷ is a tenfold change, regardless of whether the coefficient moved from 2.0 to 5.0.

## Common Mistakes and Limitations

**Coefficient outside the 1 to 10 range.** Writing 25 × 10³ instead of 2.5 × 10⁴ is the most common error. The fix is to move the decimal point one place and adjust the exponent by 1. If the coefficient is 10 or greater, increase the exponent by the number of places you moved the decimal left. If the coefficient is less than 1, decrease the exponent.

**Confusing the direction of negative exponents.** A negative exponent means a small number, not a negative number. The value -3.2 × 10⁻⁴ is negative and small. The value 3.2 × 10⁻⁴ is positive and small. The sign of the coefficient and the sign of the exponent are independent.

**Adding or subtracting without matching exponents.** Adding 2.0 × 10³ and 3.0 × 10⁴ by adding coefficients gives 5.0 × 10⁷, which is wrong by a factor of 10,000. The exponents must be aligned first.

**Misreading e notation.** A calculator display of 4.5E-7 is 4.5 × 10⁻⁷, not 4.5 raised to the power of e or a typo. This mistake commonly appears when students transcribe calculator output into lab reports.

**Losing significant figures during conversion.** Converting 230 to 2.3 × 10² drops the information that the zero was significant. If the measurement was 2.30 × 10², keep the zero in the coefficient.

**Rounding too early in multi-step calculations.** If you round the coefficient to two significant figures before multiplying several values, rounding error can accumulate. Carry extra digits through intermediate steps and round only the final answer.

**Limitations of the format.** Scientific notation does not by itself tell you whether a number is a measurement or an exact count. The number 12 eggs in a carton is exact and has infinite significant figures, while 1.2 × 10¹ eggs implies a measurement with two significant figures. The format also cannot represent zero in a way that conveys precision, and it is less convenient than plain decimal notation for numbers between 0.01 and 10,000 where the exponent adds no practical value.

## Quick Review

- Scientific notation is a × 10ⁿ, where 1 ≤ |a| < 10 and n is an integer.
- Moving the decimal point left gives a positive exponent. Moving it right gives a negative exponent.
- The exponent tells you the order of magnitude. Each step of 1 in the exponent is a tenfold change.
- E notation, such as 6.02e23, means the same thing as 6.02 × 10²³.
- Significant figures are shown entirely in the coefficient. The power of 10 never changes precision.
- To multiply, multiply coefficients and add exponents. To divide, divide coefficients and subtract exponents.
- To add or subtract, rewrite both numbers with the same exponent first.

## Unit Conversions and Dimensional Analysis with Scientific Notation

Every metric prefix is a power of 10, so converting between prefixes is an exercise in adding or subtracting exponents. The table below shows the prefixes most common in biology and chemistry laboratories.

| Prefix | Symbol | Power of 10 | Scientific notation |
|-|-|-|-|
| nano | n | 10⁻⁹ | 1 × 10⁻⁹ |
| micro | µ | 10⁻⁶ | 1 × 10⁻⁶ |
| milli | m | 10⁻³ | 1 × 10⁻³ |
| centi | c | 10⁻² | 1 × 10⁻² |
| kilo | k | 10³ | 1 × 10³ |
| mega | M | 10⁶ | 1 × 10⁶ |

### Setting Up Conversion Factors

A [conversion factor](/knowledge/diagnostics/molecular/laboratory-measurements) is a fraction equal to 1. To convert 7.5 micrometers to meters, write the relationship 1 µm = 10⁻⁶ m and multiply:

7.5 µm × (10⁻⁶ m / 1 µm) = 7.5 × 10⁻⁶ m

The original unit cancels because it appears in the numerator of the starting value and the denominator of the conversion factor. The exponent in the answer comes directly from the power of 10 in the factor. Invert the factor by mistake and you get 7.5 × 10⁶ m, which is wrong by twelve orders of magnitude.

### Worked Example from Chemistry

A stock solution is 2.5 × 10⁻³ mol/L. Convert this to micromolar (µM). Since 1 mol = 10⁶ µmol:

2.5 × 10⁻³ mol/L × (10⁶ µmol / 1 mol) = 2.5 × 10³ µmol/L = 2.5 × 10³ µM

The exponents add: -3 + 6 = 3. The concentration is 2.5 × 10³ µM, or 2.5 mM.

### Tracking Exponents Through Multiple Steps

For multi-step conversions, chain factors together and add exponents at each step. Convert 0.45 mg to nanograms:

0.45 mg × (10⁻³ g / 1 mg) × (1 ng / 10⁻⁹ g) = 0.45 × 10⁶ ng = 4.5 × 10⁵ ng

The first factor contributes -3, and dividing by 10⁻⁹ adds +9. The net exponent is 6. Alternatively, note that 1 mg = 10⁶ ng directly and write 0.45 × 10⁶ ng.

### Common Unit Errors in Lab Calculations

The most frequent errors come from losing track of the prefix. Always write the prefix as its power of 10 before combining it with a measurement. A volume of 25 mL is 25 × 10⁻³ L, not 25 × 10³ L. A mass of 3 µg is 3 × 10⁻⁶ g, not 3 × 10⁶ g.

Second, keep the unit in the conversion factor and verify that it cancels. If it does not cancel, the factor is upside down. Third, do not mix prefixes in the same expression. Convert everything to a single base unit before adding or subtracting. A solution made with 5 mL of one reagent and 0.002 L of another contains 5 × 10⁻³ L plus 2 × 10⁻³ L, or 7 × 10⁻³ L total.

Finally, check the exponent against common sense. A liter is larger than a milliliter, so converting 0.5 L to mL must give a number greater than 0.5, namely 5.0 × 10² mL. If your calculation yields 0.5 × 10⁻³ mL, the factor is inverted. A quick dimensional check catches this before it reaches the lab notebook.

## Order-of-Magnitude Estimates and Fermi Problems

Scientific notation is not only for recording exact measurements. It is also the backbone of quick mental estimates. When you round a coefficient to one significant figure and keep only the exponent, you get an order-of-magnitude estimate: a value correct to the nearest power of ten. That is often enough to judge whether a result is plausible, to choose between competing hypotheses, or to catch a misplaced decimal point.

### Rounding Coefficients and Comparing Exponents

To make an order-of-magnitude estimate, round the coefficient to 1 or a small integer and keep the exponent. Avogadro's number, 6.022 × 10²³, becomes about 6 × 10²³. The speed of light, 2.998 × 10⁸ m/s, becomes about 3 × 10⁸ m/s. Once numbers are in this form, comparing them is trivial: the difference in exponents is the number of factors of ten between them. A distance of 10² m is a thousand times larger than a distance of 10⁻¹ m because the exponents differ by 3.

### Fermi Problems

A Fermi problem is an estimation exercise that uses only order-of-magnitude reasoning to arrive at a rough answer, usually within a factor of ten of the true value. The name comes from Enrico Fermi, who used such estimates to great effect. The method is simple: break the unknown quantity into factors you can estimate, express each factor in scientific notation, and multiply.

**Example from cell biology.** Estimate the number of cells in the human body. Assume a body mass of about 70 kg and an average cell mass of about 10⁻¹² kg. Dividing gives 70 ÷ 10⁻¹² = 7 × 10¹³, which rounds to about 10¹⁴ cells. The accepted figure is on the order of 10¹⁴, so the estimate is correct in order of magnitude.

**Example from pharmacology.** Estimate how many molecules are in a typical drug tablet. Assume a 10 mg dose and a molar mass of 300 g/mol. Convert the dose to grams: 0.010 g. Divide by the molar mass to get moles: 0.010 ÷ 300 ≈ 3 × 10⁻⁵ mol. Multiply by Avogadro's number, about 6 × 10²³ mol⁻¹, to get roughly 2 × 10¹⁹ molecules. The exact drug differs, but the answer will almost always land between 10¹⁸ and 10²⁰.

**Example from physics.** Estimate the number of seconds in a year. There are 365 days, 24 hours per day, and 3600 seconds per hour. Multiplying 3.65 × 10² × 2.4 × 10¹ × 3.6 × 10³ gives 3.15 × 10⁷, or about 3 × 10⁷ seconds per year. This constant, memorized as π × 10⁷, is useful for converting between years and seconds in many physics estimates.

Fermi estimates are also powerful sanity checks. If a calculation yields a cell count of 10²⁰ or a drug molecule count of 10¹², the exponent alone signals that an assumption or a unit conversion is wrong. The coefficient matters for precision, but the exponent matters for truth.

## Scientific Notation in Graphs, Logs, and Data Reporting

The connection between scientific notation and logarithms is direct. The base 10 logarithm of a value a × 10ⁿ is log₁₀(a) + n. Since a lies between 1 and 10, log₁₀(a) is a decimal between 0 and 1, and the exponent n becomes the integer part, or characteristic, of the logarithm. Reading the exponent off a number in scientific notation therefore gives its scale immediately. The value 4.5 × 10⁻⁷ has a base 10 log of about -6.35, so it sits roughly 6.35 decades below 1.

### Logarithmic axes

When a [journal figure](/blog/research-skills/the-figure-legend-your-secret-weapon-for-understanding-any-graph-or-image) uses a logarithmic axis, the [major tick marks](/blog/research-skills/labeling-your-figures-for-maximum-clarity-font-sizes-legends-and-annotations-that-work-on-a-poster) are powers of 10. The label on a tick is often written as 10², 10³, 10⁴, or as the exponent alone: 2, 3, 4. A value falls on the axis at a position proportional to its logarithm. To place a point such as 3 × 10⁴ on a log axis, find the tick for 10⁴ and move a distance of log₁₀(3), about 0.48 of the way to the next tick. Semilog plots use a log scale on one axis and a linear scale on the other; log-log plots use log scales on both. These formats are standard for data that span several orders of magnitude, such as dose-response curves, growth rates, and gene expression ratios.

### Reading axes in figures

Check whether an axis is logarithmic before interpreting spacing. On a linear axis, the distance between 1 and 2 equals the distance between 2 and 3. On a log axis, the distance between 10¹ and 10² equals the distance between 10² and 10³, and each interval represents a tenfold change. A point halfway between 10² and 10³ on a log axis is about 3.16 × 10², not 5 × 10², because the midpoint in log space is the geometric mean. Misreading this is a common source of error when estimating values from [published graphs](/blog/research-skills/how-to-read-a-scientific-figure-a-step-by-step-guide-to-axes-legends-and-error-bars).

### Reporting extreme values

In tables, abstracts, and lab reports, scientific notation preserves precision that plain decimals can obscure. A value written as 0.0000000345 is easy to miscount; 3.45 × 10⁻⁸ is unambiguous. Keep the coefficient within the 1 to 10 range and use a consistent exponent convention within a column so readers can compare magnitudes at a glance. Where values range from 10⁻⁸ to 10⁻³, consider listing all of them with a shared exponent, such as 34.5 × 10⁻⁹, or switch to metric prefixes like nanomolar. State the unit once in the column header and write coefficients without repeating the power of 10 in each cell.

In abstracts, report extreme values in scientific notation with the same number of significant figures as the measurement. If a p-value is 0.000000012, write 1.2 × 10⁻⁸. Do not round the exponent, and do not drop trailing zeros in the coefficient. When converting between scientific notation and standard form for a figure or table, carry the significant figures through unchanged.

## Related Guides

- [Sample Size Symbol and Notation: What You Need to Know](/blog/guides/sample-size-symbol-and-notation-what-you-need-to-know): Explains sample size symbols and notation for study design
- [Writing Figure Captions for Scientific Posters](/blog/research-skills/writing-figure-captions-for-scientific-posters-a-template-for-self-explanatory-visuals): Explains caption writing for scientific figures and posters

## Frequently Asked Questions

### What is scientific notation used for?

Scientific notation is used to write very large and very small numbers in a compact, readable form. It is standard in biology, chemistry, physics, and medicine for values such as cell sizes, genome lengths, concentrations, and p-values. It also makes multiplication and division of extreme values easier and makes significant figures explicit.

### How do you convert a number to scientific notation?

Move the decimal point so that exactly one nonzero digit sits to its left. Count the places moved. If you moved left, the exponent is positive. If you moved right, the exponent is negative. Write the coefficient followed by × 10 and the exponent. For example, 0.0000412 becomes 4.12 × 10⁻⁵.

### What is the difference between scientific notation and e notation?

They represent the same value. Scientific notation writes the power of 10 explicitly, as in 6.022 × 10²³. E notation is a display shorthand used by calculators and software, written as 6.022e23. The "e" stands for "times 10 to the power of" and has nothing to do with the mathematical constant e.

### How do significant figures work in scientific notation?

All digits in the coefficient are significant. The power of 10 does not affect significant figures. The value 1.50 × 10³ has three significant figures, while 1.5 × 10³ has two. This is why scientific notation is the clearest way to record the precision of a measurement.

### How do you add and subtract numbers in scientific notation?

First rewrite both numbers so they have the same exponent. Then add or subtract the coefficients and keep the shared exponent. For example, 2.0 × 10³ plus 3.0 × 10⁴ becomes 0.20 × 10⁴ plus 3.0 × 10⁴, which equals 3.2 × 10⁴.

### What is engineering notation and how is it different from scientific notation?

Engineering notation is a variation where the exponent must be a multiple of 3, such as 10³, 10⁶, or 10⁻⁹. This lets the coefficient pair directly with metric prefixes like kilo, mega, and nano. Scientific notation allows any integer exponent, so it is more flexible for pure mathematics and research writing.

<script type="application/ld+json">
{
  "@context": "https://schema.org",
  "@type": "FAQPage",
  "mainEntity": [
    {
      "@type": "Question",
      "name": "What is scientific notation used for?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Scientific notation is used to write very large and very small numbers in a compact, readable form. It is standard in biology, chemistry, physics, and medicine for values such as cell sizes, genome lengths, concentrations, and p-values. It also makes multiplication and division of extreme values easier and makes significant figures explicit."
      }
    },
    {
      "@type": "Question",
      "name": "How do you convert a number to scientific notation?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Move the decimal point so that exactly one nonzero digit sits to its left. Count the places moved. If you moved left, the exponent is positive. If you moved right, the exponent is negative. Write the coefficient followed by × 10 and the exponent. For example, 0.0000412 becomes 4.12 × 10⁻⁵."
      }
    },
    {
      "@type": "Question",
      "name": "What is the difference between scientific notation and e notation?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "They represent the same value. Scientific notation writes the power of 10 explicitly, as in 6.022 × 10²³. E notation is a display shorthand used by calculators and software, written as 6.022e23. The 'e' stands for 'times 10 to the power of' and has nothing to do with the mathematical constant e."
      }
    },
    {
      "@type": "Question",
      "name": "How do significant figures work in scientific notation?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "All digits in the coefficient are significant. The power of 10 does not affect significant figures. The value 1.50 × 10³ has three significant figures, while 1.5 × 10³ has two. This is why scientific notation is the clearest way to record the precision of a measurement."
      }
    },
    {
      "@type": "Question",
      "name": "How do you add and subtract numbers in scientific notation?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "First rewrite both numbers so they have the same exponent. Then add or subtract the coefficients and keep the shared exponent. For example, 2.0 × 10³ plus 3.0 × 10⁴ becomes 0.20 × 10⁴ plus 3.0 × 10⁴, which equals 3.2 × 10⁴."
      }
    },
    {
      "@type": "Question",
      "name": "What is engineering notation and how is it different from scientific notation?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Engineering notation is a variation where the exponent must be a multiple of 3, such as 10³, 10⁶, or 10⁻⁹. This lets the coefficient pair directly with metric prefixes like kilo, mega, and nano. Scientific notation allows any integer exponent, so it is more flexible for pure mathematics and research writing."
      }
    }
  ]
}
</script>

## Further Reading

- [Prolonged Rewarming Was Associated with Reduced Alkaline Phosphatase Bias in External Quality Assessment Materials: A Laboratory Study.](https://pubmed.ncbi.nlm.nih.gov/42980201/)
- [Application Value of Fluorescence Polarization Measurement in the Diagnosis of Brucellosis.](https://pubmed.ncbi.nlm.nih.gov/42639939/)
- [Can velocity increment derived from a single, lumbar-mounted inertial measurement unit serve as a surrogate for propulsion force impulse in healthy and post-stroke individuals?](https://pubmed.ncbi.nlm.nih.gov/42837900/)
- [Field and Laboratory Studies for Predicting Annual Generations of Spodoptera littoralis (Boisd.) Using Sex Pheromone Traps and Cumulative Heat Unit Measurements in Egypt.](https://pubmed.ncbi.nlm.nih.gov/42652442/)
- [A Synergistic Approach to the Structural Characterization of 2-(Morpholin-4-yl)quinoline-3-carbaldehyde by Solution and Solid-State NMR Spectroscopy, Supported by Single-Crystal X-Ray Diffraction and DFT Calculations.](https://pubmed.ncbi.nlm.nih.gov/42535363/)